Maytag Dryer Filters

Maytag Appliance Parts

Popular Maytag Dryer Filters

Lint Filter

PartSelect Number PS1491676

Manufacturer Part Number W10120998

The filter collects lint during the drying bike. This filter is 12 1/2 inches wide and x 1/2 inches deep. Replacing the lint filter is an like shooting fish in a barrel repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which tin can exist a fire risk. Go on to check ofttimes to make sure the filter and slot are both cleared of lint.

Fixes these symptoms

  • Door won't close
  • Marks left on clothes
  • No heat or non enough heat
  • See more than...

Installation Instructions

JEFFREY from Autumn RIVER, MA

felt strip came off lint screen

ordered new lint screen, removed old screen, inserted new screen. Read more...

Lint Filter

PartSelect Number PS11741075

Manufacturer Part Number WP33001808

This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new i. Check for an excess buildup of lint when changing the filter, and clean it after every use.

Fixes these symptoms

  • No heat or non enough heat
  • Noisy
  • Takes too long to dry
  • Meet more...

Installation Instructions

Anthony from DeKalb, IL

Lint into venting expanse.

Removal of old lint collector and supersede with new one. Read more than...

Lint Filter

PartSelect Number PS11741039

Manufacturer Part Number WP33001003

This lint filter is a genuine OEM replacement filter for your dryer. Replacing information technology is easy as it merely slides in similar your normal filter. Make sure to check the filter slot for excess buildup of lint, and clean information technology out after every use of the dryer.

Fixes these symptoms

  • No heat or not enough rut
  • Noisy
  • Takes besides long to dry out
  • See more...

Installation Instructions

Raymond from West Bend, WI

electric dryer was rumbling - wheel or belt?

Unplugged dryer. Front came off easily. Removed front end of blower. Bicycle came off fairly hands - could then run into that shaft of motor was circular with flattened side merely within of former wheel was rounded. New wheel popped correct on. Took tumbler off so I could clean lint out more easily and get a good view of how the chugalug threaded through. Put the tumbler dorsum on and reached back with both hands to thread it. Took a half dozen tries until I was certain it was seated correctly and non twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower bike was the crusade of the rumble. Chugalug didn't seem worn but replaced anyhow. Read more...

Lint Filter

PartSelect Number PS11741140

Manufacturer Office Number WP33002970

This is a replacement lint filter for your dryer. Replacing this role is piece of cake as it requires no disassembly of the unit. Make certain to clean the filter afterward every employ of your dryer, and check the filter slot for excess lint buildup.

Fixes these symptoms

  • No heat or non plenty heat
  • Noisy
  • Takes too long to dry
  • See more...

Installation Instructions

Daniel from Millmont, PA

Dryer wouldn't heat

This was the first time I always attempted such a repair on an appliance, but it was fairly easy in one case I figured out how to accept the front of the dryer off! I was almost certain that the igniter was the trouble was it didn't glow like it did before. On this item LP Gas dryer from Maytag there is a niggling service door on the front end near the floor. It is nearly incommunicable to get your arm in at that place plus notwithstanding take room to smoothen lite in! I took off the two screws at an angle down nearly the flooring and the whole front came off. I used a mini socket wrench to disconnect the igniter. I didn't have to remove the screw as the part slips on over the screw, then you just tighten the screw, connect the cable and it worked perfectly! Thanks PartSelect! Equally for the lint filter...the original has been broken for probably close to 10 years. Information technology was just a affair of slipping the new ane in. Read more than...

Lint Filter

PartSelect Number PS11731421

Manufacturer Part Number W10859086

This is the replacement lint screen for your dryer. It is made of plastic and is approximately 14 inches by nine inches. The lint screen traps unwanted lint and debris so your dryer can effectively dry your clothes. If the former lint screen is cracked or clogged, the dryer takes too long to dry, or excessive lint is accumulating inside the dryer or its venting, you may need to supercede it. But remove the erstwhile, damaged filter, and replace information technology with the new one.

Associates, Lint Screen

PartSelect Number PS11746639

Manufacturer Part Number WP8572270

Also known equally Lint Screen. Handle is white in color.

Lint Filter

PartSelect Number PS11755878

Manufacturer Part Number WPW10516085

Note: As per industry the felt seal is no longer needed with the lint filter.

Installation Instructions

Tammy from JACKSONVILLE, FL

The screen in the lint filter was broken

Since it was a dryer filter, it just had to exist put in the dryer. Works GREAT!! Read more...

Lint Filter

PartSelect Number PS11741919

Manufacturer Function Number WP37001142

Note: This function no longer comes with the felt seal. This filter collects lint every bit information technology passes through the dryer vent.

Fixes these symptoms

  • Door won't close
  • Marks left on wearing apparel
  • No oestrus or non enough heat
  • See more...

Installation Instructions

Tim from South Glens Falls, NY

The Felt Gasket betwixt drum and door ripped, vent manifold from Dryer to fan and lint screen broken

I pulled the bottom console and the door panel to replace the manifold and felt gasket effectually the pulsate. I removed former gasket very hands, information technology peeled correct off. I apply brake cleaning fluid (Spray Tin from Auto Zone about $1.45) to remove old mucilage. Used spray contact cement (Elmer's about 4.l at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra ready of hands to hold the gasket in place while y'all stretch it over the the panel. The vent manifold is held in identify with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, then I bought one of them besides. Now have an extra lint screen Read more than...

Lint Filter

PartSelect Number PS11738127

Manufacturer Part Number W10874409

This lint filter screen has a white handle. This filter collects lint as it passes through the dryer vent.

Installation Instructions

Katharine from Palm Springs, CA

The lint filter was seriously damaged

After the new filter arrived, I took the old filter out, put the newe one in. No tools, no difficulty at all. Actually, the actually difficult function of this entire episode was finding the model number on the dryer. It was on the underside of the door. Read more than...

Lint Filter

PartSelect Number PS11741824

Manufacturer Part Number WP35001141

This filter collects lint as it passes through the dryer vent.

Related Parts